Assessment of changes in the stress-strain state of the lower suspension arm of a self-propelled modular vehicle during its operation
Abstract
This article discusses the results of a full-scale experiment to assess changes in the stress-strain state of the lower suspension arm of a self-propelled modular transporter (SPMT) during its operation using the electrical strain gauge method. The relevance of this article is that the presented information on the change in the stressstrain state of the lower suspension arm can be used in the design of domestic analogues of SPMT and for the selection of appropriate materials for the manufacture of structural elements of the modular transporter suspension.
About the Author
M. A. Puzrov
Bauman Moscow State Technical University
Russian Federation
Russian Federation
Mikhail A. Puzrov, postgraduate student of the Department of Lifting and Transport Systems
105005, Moscow, 2nd Bauman str., 5
References
1. Midakov A.V., Puzyrev M.A., Tropin S.L., Musinov A.N. Assessment of the load on the drive axles of self-propelled modular vehicles under various operating modes // Automobile. Road. Infrastructure. 2023. №4 (38).
2. Potapov V.I. How to perform scientific research, write, issue and defend a master's thesis: studies. the manual / V.I. Potapov, D.V. Postnikov. Omsk: Publishing house of OmSTU, 2013. – p.
3. Vereshchagin S.B. Planning and evaluation of test results of wheeled and tracked vehicles: A textbook. - M.: MADI (GTU),. 2008 - 60 p.
4. Vasiliev A.I. Monitoring of the technical condition of bridge structures: a textbook / A.I. Vasiliev. – M.: MADI, 2021. – 120 p.
Review
For citations:
Puzrov M.A. Assessment of changes in the stress-strain state of the lower suspension arm of a self-propelled modular vehicle during its operation. Machines and Plants: Design and Exploiting. 2024;(3):40 - 44. (In Russ.)
Views:
39
Email this article 